2.25" Hard Kore 
Quiet Baffle
Original Baffle
Smartpartz accepts credit cards
FITS THE FOLLOWING EXHAUSTS:
Cobra Speedster Longs

SMARTPARTZ PART NUMBER:
SPZCB22520SL

CONTENTS :  
2 Hard Kore Quiet Baffles, 
1 Allen Keys, 2 Allen Screws.

IMPORTANT :
Use Loctite on all screws.
Use WD40 on both ends of original baffle to ease reinstallation.

INSTALLATION INSTRUCTIONS:
1.  Remove exhaust end cap and original baffle with allen key provided.
2.  Drill 5/16” hole in original baffle 5/16ths of an inch from end.
3.  Insert Hard Kore Baffle into original baffle so that the Hard Kore Baffle is hard up against the end of the original baffle and the threaded tab is centered in the hole you drilled (ignore 2nd tab) - DO NOT SCREW yet.
4.  Reinsert original baffle with Hard Kore Baffle into exhaust pipe.  Align hole.  Now insert screw through pipe, original baffle & Hard Kore Baffle and retighten.
5.  Replace end cap.

MSRP $69.95 per pair (plus shipping & handling, tax if applicable)


NOTE :  As with all motor modifications, some rejetting may be required.  The baffles may create a slightly rich condition in some circumstances.  


Smartpartz Hard Kore Quiet Baffles
for Cobra Speedster Longs
* TM
Baffle tab
Exhaust pipe
Exhaust pipe
--5/16" Hole You Drilled
Exhaust pipe
5/16"
Buy Online Now
Copyright © 2016 Smartpartz, LLC. All rights reserved.
Pic shows original baffle slid out of exhaust.  The Smartpartz baffle is butted against the original baffle ready to slide right back up into exhaust before attaching with screw.
QUIET DOWN YOUR CRUISER EXHAUST
Hard Kore Baffles
TM
* Patent pending.
Smartpartz Hard Kore Quiet Baffles

COBRA QUIET BAFFLESHARD KROME QUIET BAFFLESROADBURNER QUIET BAFFLESVANCE AND HINES QUIET BAFFLESOTHER QUIET BAFFLES