Smartpartz Hard Kore Quiet Baffles for Hard Krome Slash Cut Drag Slip Ons

Made in USA

Hard Kore

Quiet Baffle

Original Baffle

Quiet baffles available for immediate delivery.

Call Smartpartz tollfree on 1-800-560-0368 within USA,

or 714-464-2184.

9am-4pm US Pacific Standard Time

MSRP $69.95 per pair (plus shipping & handling, tax if applicable)

FITS THE FOLLOWING EXHAUSTS:

Hard Krome Slash Cut Drag Slip Ons

(where muffler outside diameter is 2.25")

SMARTPARTZ PART NUMBER:

SPZHKSCDSO

CONTENTS :

2 Hard Kore Quiet Baffles,

1 Allen Key.

IMPORTANT :

Use Loctite on all screws.

Use WD40 on end of original baffle to ease reinstallation.

INSTALLATION INSTRUCTIONS:

1. Remove original baffle with allen key provided.

2. Drill 5/16” hole in original baffle 5/16ths of an inch from end of the original baffle as shown above.

3. Insert Hard Kore Quiet Baffle into original baffle so that the Hard Kore Baffle is hard up against the end of the original baffle and the threaded tab is centered in the hole you drilled.

4. Reinsert original baffle with Hard Kore Baffle into exhaust pipe. Align hole. Reinsert allen screw from original baffle through the exhaust pipe, through the hole you drilled and into the Smartpartz Hard Kore Quiet Baffle, and tighten.

* NOTES :

(1) The baffles may create a slightly rich condition in some circumstances. As with all motor modifications, some rejetting may be required.

Smartpartz

Hard Kore Quiet Baffles

for Hard Krome 2.25" Slash Cut Drag Slip Ons

* TM

--5/16" Hole You Drilled

7/16"