Smartpartz Hard Kore Quiet Baffles - Slashcut Staggereds Style

Made in USA

Hard Kore

Quiet Baffle

- Slashcut Staggereds Style

Figure 4

Exhaust Pipe

* TM

Quiet baffles available for immediate delivery.

Call Smartpartz tollfree on 1-800-560-0368 within USA,

or 714-464-2184.

9am-4pm US Pacific Standard Time

MSRP $69.95 per pair (plus shipping & handling, tax if applicable)

FITS THE FOLLOWING EXHAUSTS:

Vance & Hines Slashcut Staggereds

for Kawasaki 900.

SMARTPARTZ PART NUMBER:

SPZVHKSS

CONTENTS :

2 Hard Kore Baffles, 2 Allen Keys,

2 Allen Screws, 2 Nuts, 4 Set Screws

INSTALLATION TIPS :

Use Loctite on all screws.

INSTALLATION INSTRUCTIONS:

1. Remove heatshields.

2. Remove buttonhead allen screw holding original baffle.

3. Push original baffle into muffler body approx 1”. Insert set screw into welded nut on original baffle to secure original baffle. Do not over tighten set screw – a firm, snug fit is all that is required.

4. Insert the Smartpartz baffle as shown above. Use allen secrews and cap nuts to secure in place. Insert set screws in threaded nut on the Smartpartz baffle. Do not overtighten as they can deform the exhaust pipe if overtightened.

5. Replace heatshields.

Smartpartz

Hard Kore Quiet Baffles

- Slashcut Staggereds Style

Exhaust Installed with Hard Kore Quiet Baffle - Slashcut Staggereds Style ... before replacing heatshield.

NOTE : As with all motor modifications, some rejetting may be required. The baffles may create a slightly rich condition in some circumstances. Generally, leaning up the fuel/air mixture screw slightly is all that is required.

Webmaster: HeathersWWWeb.com